Description: HDOCAT-BD HDMI over CAT Extender allows transmission of HDMI, I.R. and Toslink Optical Audio over standard CAT-5/6 Ethernet cables. The HDOCAT-BD Extender consists of a HDMI Transmitter and a HDMI Receiver and allows transmission of 1080P HD over 120ft over Ethernet cables.
Transmitter Unit Receiver Unit Installation Connect CAT6 -1 of the Transmitter and Receiver With CAT5e/6 cable. Connect CAT6 -2 of the Transmitter and Receiver With CAT5e/6 cable. IR connection-configure and connect as shown in section: “ IR Configuration” (see page 5) Toslink Digital Audio -configure and connect as shown in section: “Toslink Digital Audio Configuration”...
Toslink Digital Audio Configuration The Toslink digital audio can be sent in 1 of 2 directions: 1) Receiver to Transmitter unit OR 2) from Transmitter to Receiver unit. Configuration 1: Sending Digital Optical Audio from: Receiver to Transmitter unit. Transmitter Unit Receiver Unit Set Digital Audio/Optical switch Set Digital Audio/Optical switch...
IR Configuration The I.R. can be sent in 1 of 2 directions: 1) Receiver to Transmitter unit OR 2) from Transmitter to Receiver unit. Configuration 1: Sending IR from Receiver to Transmitter Unit Transmitter Unit Receiver Unit Set IR switch to the OUT(TX) Set IR switch to the position as shown IN(RX)position as shown...
Mounting Tabs The HDOCAT-BD includes removable wall mounting tabs. The wall mounting tabs can be removed if not needed wall mounting tabs installed Wall mounting tabs can be removed if not needed.
Powering Options Options Description Dedicated powering Power from power Transmitter: supplies ( included) connect power supply Receiver : connect power supply USB to 2.5mmDC plug Power Receiver from power cable( for receiver) USB to DC adapter Transmitter: cable. Must have connect power supply HDTV with USB2 that Receiver :...