Menu
Item
Equaliser
Balance
Surround
Headphone Volume
Auto Gain Control
Volume Correction
Speaker Distance to Wall
NICAM
Audio Preference
Ireland only
SPDIF Selection
SPDIF Delay
Ireland only
Adjustments / Configurations (alternatives)
Adjusts the frequency level to suit your favourite sound quality.
●
This function is available when [Mode] is set to [User].
●
Select the frequency and change the frequency level by using the cursor
button.
●
To enhance the bass sound, raise the level of the lower frequency.
To enhance the treble sound, raise the level of the higher frequency.
●
To reset the levels of each frequency to the default settings, select
[Reset to Defaults] by using the cursor button, and then press
Adjusts volume level of right and left speakers.
Surround sound settings. [Off] / [On]
Adjusts the volume of the headphones.
Automatically regulates large sound level differences between channels and
inputs. [Off] / [On]
Adjusts the volume of individual channel or input mode.
Compensates for the low frequency sound due to the distance between the
speakers and the wall. [Over 30cm] / [Up to 30cm]
●
If the back space between the TV and wall is over 30 cm, [Over 30cm] is
recommended.
●
If the back space between the TV and wall is within 30 cm, [Up to 30cm] is
recommended.
Reproduces NICAM stereo sound.
●
Only for Analogue mode
Selects the initial setting for audio tracks. [Multichannel] / [Stereo] / [MPEG]
●
For digital mode
SPDIF: A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO and
HDMI 2 (ARC) (ARC function) terminals.
●
For DVB mode or video contents of [Media player]
[Auto] / [PCM]
[Auto]: Dolby Digital Plus, Dolby Digital and HE-AAC multi-channel are output
as Dolby Digital Bitstream. MPEG is output as [PCM].
DTS is output as DTS for video contents of [Media player].
[PCM]: Digital output signal is fixed to [PCM].
●
ARC (Audio Return Channel) : A function of digital audio output using HDMI
cable
Adjusts the delay time of the sound output from DIGITAL AUDIO and
HDMI 2 (ARC) (ARC function) terminals, if the sound does not synchronise the
image.
●
For digital mode
button.
21