Panasonic TX-L32EM6B Operating Instructions Manual page 17

Aspect
Change the aspect ratio (image size)
Enjoy viewing the image at its optimum size and aspect.
ASPECT
Programmes usually contain an "Aspect Control Signal" (Widescreen signal, etc.), and the TV will choose
the aspect ratio automatically according to the "Aspect Control Signal".
„ If you would like to change the aspect ratio manually
1
Display [Aspect Selection] list
ASPECT
[Auto] ]
The aspect ratio works automatically based on programmes signal format.
[16:9]
Directly displays the image at 16:9
without distortion (anamorphic).
[14:9] ]
Displays the image at the standard 14:9
without distortion.
[Just]
Displays a 4:3 image full-screen.
Stretching is only noticeable at the left
and right edges.
[4:3] ]
Displays the image at the standard 4:3
without distortion.
Note
● Not available in teletext service.
2
While the list is displayed,
select the mode
Aspect Selection
Auto
16:9
OK
14:9
Just
4:3
Zoom
4:3 Full
Sidecut Just
Sidecut Zoom
Select
Change
RETURN
[Aspect Selection] list
● You can also change the mode only
select
using
ASPECT
store
[oom] ]
Displays a 16:9 letterbox or 4:3 image
without distortion.
[4:3 Full] ]
Displays a 4:3 image enlarged
horizontally to fit the screen.
● HD signal only
[Sidecut oom]
Displays a 16:9 letterbox (anamorphic)
image full-screen without distortion.
● HD signal only
[Sidecut Just] ]
Displays a 16:9 letterbox (anamorphic)
image full-screen. Stretching is only
noticeable at the left and right edges.
● HD signal only
button.
(Press repeatedly until you
reach the desired mode)
17