Ceru vu+ ultimo User Manual page 54

+
Vu User Manual
Amongst the parameters given in this menu, the following ones are generally what you need to decide for
the audio and video.
Video output
1
Here you need to decide which video output you want to use between your TV and Vu+.
The available options are as below.
• CVBS
•
S-Video
•
RGB
Mode
2
You need to decide which resolution to use according to the video output above and your TV amongst
the following options.
Resolution
Dolby Digital Default
3
YES is used when you want to set Dolby Digital audio as the default audio. If the program you are
watching has Dolby Digital and Stereo, Dolby Digital is used.
On the other hand, NO is used when you do not want to set Dolby Digital audio as the default audio. If
the program you are watching has Dolby Digital and Stereo audio, Stereo audio is used.
Dolby Digital Downmix
4
YES is used when you want to set the audio output to be down-mixed from Dolby Digital to Stereo. NO
is used when you do not want to set the audio output to be down-mixed from Dolby Digital to Stereo. If
NO is on and you are using only HDMI or SCART connection, there can be no audio sometimes, if the
program that you are watching provides Dolby Digital only. This option is recommended when you are
using S/PDIF connection.
+
54 Vu :
Your Smart Linux TV Player
Scart
PAL
NTSC
Multi