Gigabyte GA-K8VT800(Pro) User Manual page 10

On-Board IDE RAID
On-Board IEEE1394
PS/2 Connector
BIOS
Additional Features
Overclocking
Please set the CPU host frequency in accordance with your processor's specifications.
We don't recommend you to set the system bus frequency over the CPU's specification because
these specific bus frequencies are not the standard specifications for CPU, chipset and most of the
peripherals. Whether your system can run under these specific bus frequencies properly will
depend on your hardware configurations, including CPU, Chipsets, SDRAM, Cards...etc.
(j) For GA-K8VT800 Pro only
GA-K8VT800(Pro) Motherboard
K8vt800pro_1001_i.p65
— Onboard GigaRAID IT8212F chipset
(j)
— Supports data striping (RAID 0) or mirroring (RAID 1) or
striping+mirroring (RAID 0 + RAID 1)
— Supports JBOD function
— Supports concurrent dual ATA133 IDE controller operation
— Support ATAPI mode for HDD
— Supports IDE bus master operation
— Support ATA133/RAID mode switch by BIOS
— Displays status and error checking messages during boot-up
— Mirroring supports automatic background rebuilds
— Features LBA and Extended Interrupt 13 drive translation in
controller onboard BIOS
— Built-in Ti TSB43AB23
(j)
— PS/2 Keyboard interface and PS/2 Mouse interface
— Licensed AWARD BIOS
— Supports Dual BIOS
— Supports Face Wizard
— Supports Q-Flash
— PS/2 Keyboard power on by password
— PS/2 Mouse power on
— External Modem wake up
— STR(Suspend-To-RAM)
— Wake on LAN (WOL)
— AC Recovery
— Poly fuse for keyboard over-current protection
— USB KB/Mouse wake up from S3
— Supports Thermal Shutdown function
— Supports Easy Tune4
— Supports @BIOS
— Over Voltage (CPU/DDR/AGP) by BIOS
— Over Clock (CPU/DDR/AGP) by BIOS
- 10 -
10
(j)
(j)
2003/8/26, ¤W¤È 11:52