Yamaha RX-V640RDS Owner's Manual page 22

BASIC SYSTEM SETTINGS
SET MENU
BASIC
1 SETUP
Press j / i to alter the settings for each
parameter. Use d to move to the next
setting.
1 ROOM
Choose from S/M/L.
2 SUBWOOFER
Choose either of YES/NONE.
3 SPEAKERS
Choose from 2/3/4/5/6 spk.
4 SET/CANCEL
CANCEL
Choose either of SET/CANCEL.
5 CHECK OK:
YES
Choose either of YES/NO.
• After altering the "1 SETUP" parameters, readjust the output levels of the speakers at "2 SP LEVEL".
• See pages 40 – 46 for a detailed explanation of the "SOUND", "INPUT" and "OPTION" menus.
20
SOUND INPUT
SET
NO
OPTION
2 SP LEVEL
Press j / i to adjust the balance
between each speaker and the left main
speaker. Use d to move to the next
setting.
1 L-R
Adjust the balance between the main
left and right speakers.
2 C
Adjust the balance between the main
left and center speakers.
3 RL
Adjust the balance between the main
left and rear left speakers.
4 RC
Adjust the balance between the rear
left and rear center speakers.
5 RR
Adjust the balance between the rear
left and rear right speakers.
6 SWFR
Adjust the balance between the main
left speaker and the subwoofer.