TRENDnet TPL-302E2K Quick Installation Manual page 13

Hide thumbs Also See for TPL-302E2K:

Available languages

14. Click Network ID.

Note: The default network name is TRENDnet. If the network ID of your

existing Powerline network is NOT TRENDnet, you must change this in the

utility.

15. If you would like to change the

Network ID, enter the desired ID.

Then enter the 12 digit DAK

(device) Password for the

Remote TPL-302E (see step 8).

Note: The DAK (device)

Password is case sensitive. You

must enter the DAK (device)

password with the dashes. For

example: XXXX-XXXX-XXXX-

XXXX. Then click Save Changes.

Wait 30 seconds while changes

are being saved.

16. If Device Selection does not

automatically switch to Local,

select Local from the dropdown

list.

Note: Local refers to the TPL-302E that is connected to an Ethernet

connection on your network or an available LAN port on your router.

English

Table of Contents

Tpl-302e