Mounting The Speakers On The Wall (Nx-E440) - Yamaha NS-P446 Owner's Manual

SETTING UP THE SPEAKERS

Mounting the speakers on the wall (NX-E440)

You can mount the speakers on a wall. To mount the speakers on a wall, use the holes of the brackets attached on the rear
panels of the speakers.
Rear view
1
Fasten two screws into a firm wall or wall
support at the interval shown below.
Tapping screw
(Available at the
hardware store)
Diam. 3.5 to 4 mm
(1/8" to 5/32")
Min. 20 mm
4 mm
(25/32")
(5/32")
Wall/Wall support
4
Holes
40 mm (1-9/16")
2
Hang the speaker by mounting the holes on
the protruding screws.
Make sure that the screws are securely affixed by the
narrow parts of the holes.
40 mm
(1-9/16")
Caution
• Each speaker weighs as follows
........................................................... 1.4 kg (3.1 lbs.)
• Do not mount the speakers on thin plywood or a
wall composed of a soft surface material. If
mounted, the screws may pull out of the flimsy
surface and the speakers may fall. This may
damage the speakers or cause personal injury.
• Do not affix the speakers to a wall using nails,
adhesives, or any other unstable hardware. Long-
term use and vibrations may cause the speakers to
fall.
• To avoid accidents resulting from tripping over
loose speaker cables, fix the cables to the wall.
• Select an appropriate position on the wall to mount
the speaker so that no one will injure his/her head
or face.