Nikon COOLPIX S6600 Quick Start Manual page 10

3.
2 Make sure the battery is installed in the camera, and then connect the camera
to the Charging AC Adapter in order of 1 to 3.
Keep the camera turned off.
Make sure that the plugs are properly oriented. Do not insert or remove the plugs at
an angle when connecting or disconnecting them.
Charge lamp
The charge lamp slowly flashes green to indicate that the battery is charging.
Shooting is not possible while the camera is connected to the Charging AC Adapter.
About 3 hours are required to charge a fully exhausted battery.
3.
3 Disconnect the Charging AC Adapter from the electrical outlet and then
disconnect the USB cable.
10
First Steps
USB cable (included)
Electrical outlet