Yamaha YSP-800 Owner's Manual page 91

■ Remote control
Problem
The remote control does not work
and/or function properly.
You cannot operate external
components with this unit's
remote control.
The cursor buttons do not work
during SET MENU operation.
Cause
Wrong distance or angle.
Direct sunlight or lighting (from an
inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this
unit.
The batteries are weak.
The external component you want to
operate is not selected as the input
source.
The remote control code was not
correctly set.
Even if the remote control code is
correctly set, there are some models that
do not respond to the remote control.
You pressed an input selector button.
TROUBLESHOOTING
Remedy
The remote control will function within a
maximum range of 6 m and no more than
30 degrees off-axis from the front panel.
Reposition this unit.
Replace all batteries.
Press INPUT on the front panel or the
input selector buttons on the remote
control to select the external component
you want to operate.
Set the remote control code correctly or
try another code for the same
manufacturer using the "LIST OF
REMOTE CONTROL CODES" at the
end of this manual.
Use the remote control supplied with the
external component.
Press TEST once.
See
page
22
—
22
37
82
—
—
89