Turn On; Select A Source; Store Fm Radio Stations Automatically - Philips AZ1 User Manual

Turn on

Press to turn on the product.
» The product switches to the last
selected source.
Switch to standby mode
The product switches to standby mode in the
following situation:
• Press again;
• In disc mode, there is no disc for 15
minutes;
• Music playback is stopped for 15 minutes;
or
• USB, Bluetooth, or other external devices
are disconnected with this product for 15
minutes.

Select a source

Press SOURCE repeatedly to select a source:
FM tuner, Bluetooth, AUDIO IN, Disc, or USB.
Store FM radio stations
automatically
Note
•
For better reception, fully extend and adjust the
position of the antenna.
When the product is powered on and no radio
stations are stored, the product prompts you to

store FM radio stations automatically.

1
Connect the product to the power supply.
» [AUTO INSTALL - PRESS PLAY,
STOP CANCEL] (to install stations
automatically, press
press ) is displayed.
EN
8
; to cancel,
2
Press to start full scan.
» The product automatically stores FM
radio stations with sufficient signal
strength.
» After all stations are stored, the
first preset station is broadcast
automatically.
» If no radio stations are found, [CHECK
ANTENNA] (check antenna) scrolls
on the display.