Section 3 – Configurations
WIRELESS SECURITY MODE – WPA-Personal
Use WPA or WPA2 mode to achieve a balance of strong security and
best compatibility. This mode uses WPA for legacy clients while
maintaining higher security with stations that are WPA2 capable. Also
the strongest cipher that the client supports will be used. For best
security, use WPA2 Only mode. This mode uses AES (CCMP) cipher
and legacy stations are not allowed access with WPA security. For
maximum compatibility, use WPA Only. This mode uses TKIP cipher.
Some gaming and legacy devices work only in this mode.
According to the WiFi Alliance 11N specification, Wi-Fi Protected Setup
is not full supported under WPA Only mode. We will disable your Wi-Fi
Protected Setup if you use WPA Only mode.
Choose Auto(WPA or WPA2) / WPA2 only / WPA only on the WPA
Mode
Type the value seconds on the Group Key Update Interval. The default
value is 1800.
Type the string on the Pre-Shared Key
Click the Apply Settings button to save the configuration.
Choose the Hide or Display to decide if you want to show the SSID.
D-Link DSL-2640B User Manual
37