Increasing Recording Channels - T&D MCR-4TC User Manual

Increasing Recording Channels

Up to four units can be coupled together to allow for a maximum of
16 channels.
When the bodies of multiple units are connected, the MCR-4TC at
the far left side will be automatically designated as the Master and
all other connected MCR-4TC units will be designated as Slaves.
By starting recording on the Master unit, all connected Slave units
will start recording at the same time.
Coupling Image
Coupling of MCR-4TC and MCR-4V is possible.
Refer to the MCR-4V User's Manual for its operating instructions.
IMPORTANT
When using MCR-4V as the Master and MCR-4TC as the Slave, Group Recording
cannot be started if the measurement interval of the Master is less than 100ms.
Turn clockwise.
Master
Slaves
21