Bright - Samsung PS42P3SX Service Manual

1-1-2(D) TTX MODE WHITE BALANCE ADJUSTMENT
1. Adjust the timing to PAL-BDGI 780x576@50Hz with MSPG-925LTH, and load the Samsung White Balance pattern.
(When adjusting with RF signals instead of MSPG-925LTH, use the Development Team's UHF C21 Toshiba pattern.)
2. Go into the TTX mode by selecting AD9883 in the Factory mode.(Automated remote control 2f-->a)
Set the adjustment value to be the same as the Video value, as it is basically similar to Video. Change and adjust the R, G,
B-Gain for the High Light, and the R, G, B-offset for the Low Light to adjust the brightness and color coordinates.
Samsung Electronics
Alignment and Adjustments
1-3