Gianni Ferrari GTM 160 User Manual page 19

13.4 FUsEs
See figure 13.4
13.5 Air FiLtEr
See figure 13.5
Periodical checks.
13.6 ENGiNE oiL FiLtEr (GtM160)
See figure 13.6
Consult the use and maintenance manual of the motor.
EN
13.7 CArBUrAtEUr FiLtEr
See figure 13.7
13.8 tyrE PrEssUrE
See figure 13.8
If the front tires are inflated at different pressure, the blades will mow the grass at different heights
13.9 CLEANiNG tHE MACHiNE
See figure 13.9
13.10 GrEAsiNG
See figure 13.10
See tab. maintenance.
13.11 CHANGiNG/MAiNtENANCE BLAdEs
See figure 13.11
13.12 HoPPEr Grid CHANGE
See figure 13.12
14. ExtrAordiNAry MAiNtENANCE
For the extraordinary maintenance of the machine, contact only an authorised service center.
15. iNACtiVity oF tHE MACHiNE
In case the GTM lawnmower has to remain idle for a long period of time, it is convenient to carry out some ope-
rations to ensure its efficiency when reused and the duration of the same for years:
-Carry out all the indications given in the use and maintenance manual of the motor prearrange the same for
"out of service".
-Remove the battery, recharge it and store it in a dry and ventilated place.
-Clean carefully the engine with an eye in particular where there are incrustations due to soil and grass resi-
dues.
-Carry out the of "ordinary maintenance" operations described above and,if necessary, carry out also the "ex-
traordinary maintenance".
-Park the engine in a dry and ventilated place and cover it with a suitable non-impermeable protection sheet.
-During the period of inactivity, always maintain the pressure indicated for the tyres and, periodically, change the
resting point of the tyres on the ground.
- Clear a tank of fuel.
- Closed fuel tap.
16. sAFEty stiCKErs
See figure 16.
17. NotEs
A) Please contact our authorised dealer for anything that is not dealt with in this manual.
B) Always keep this technical handbook in a safe place for future reference. It can be modified without prior
notice or any additional obligations in order to improve the product. Reproduction or translation of any part of
this manual is not allowed without the owner's prior written consent.
21