Advertisement
Decent Devil AH‐64 Apache – 500 size – Instruction Manual
Once these works are finished, check the position of the mechanics again, and fasten the main frame to the
bottom of the fuselage using the original landing gear's screws.
D) Main Gear spacers and cabin holder
The next step is to install the main gear spacers as well as the weaponry support bar. These parts are all
wooden, and need to be assembled using epoxy 2 component glue. First glue in the gear spacer as shown,
glue it against the fuselage side. There is not much space, we recommend to take extra caution.
Then, start mounting the cabin holder. First of all, mount the magnets into the cutouts of the wooden board.
Make sure the magnets do match the polarity of the installed ones in the hatch. If you miss that point, your
hatch will not close! Then install the board on each side, and glue it in with epoxy glue. Also make sure that
it interconnects with the landing gear board, and also glue these two parts together to gather extra stability.
Advertisement
