Decent Devil AH-64 Instruction Manual page 10

Decent Devil AH‐64 Apache – 500 size – Instruction Manual
Then mount both hydra rocket pod and AGM missile launcher to the weapon wing using epoxy glue. Make
sure they are mounted in the proper position as shown in the picture.
Now, mount both wings in their appropriate position as well as the turbine inlet part using epoxy glue. You
may have to sand the turbine inlet to gain a proper centered mount in front of the engines inlet.
F) Tail landing gear
The tail landing gear has to be assembled as shown. The flat part has to be mounted using epoxy glue, while
the upper steel rod serves as a load distribution and goes straight into a predrilled hole in the tail of the body.
Bend the steel rod as shown to make it fit into the small hole.