Stainless Steel Surfaces - GE JRS06 Owner's Manual

Built-in electric wall oven
Table of Contents

Advertisement

Care and cleaning of the oven.
Be sure electrical power is off and all surfaces are cool before cleaning any part of the oven.
Molded rib
Spring clip
Clear groove
in stem
16
Oven Racks
Clean the oven racks with an abrasive cleanser
or steel wool. After cleaning, rinse the racks
with clean water and dry with a clean cloth.
NOTE: The shiny, silver-colored oven racks
color, lose their luster and become hard to slide
if cleaned during the self-cleaning cycle.
Oven Heating Elements
Do not clean the bake element or the broil
element. Any soil will burn off when the
elements are heated.
Control Panel
It's a good idea to wipe the control panel after
each use. Clean with mild soap and water or
vinegar and water, rinse with clean water and
polish dry with a soft cloth.
Control Knob
The control knobs may be removed for easier
cleaning.
Make sure the knobs are in the OFF positions
and pull them straight off the stems for
cleaning.
Painted Surfaces
Clean with soap and water or a vinegar and
water solution.
Glass Surfaces
To clean the outside glass finish, use a glass
cleaner. Rinse and polish with a dry cloth.

Stainless Steel Surfaces

Do not use a steel wool pad; it will scratch
the surface.
To clean the stainless steel surface, use warm
sudsy water or a stainless steel cleaner or
polish. Always wipe the surface in the direction
of the grain. Follow the cleaner instructions for
cleaning the stainless steel surface.
To make the racks slide more easily, apply a
small amount of vegetable oil or cooking oil to
a paper towel and wipe the edges of the oven
racks with the paper towel.
To clean the oven floor, gently lift the bake
element. Clean with warm soapy water.
Do not use abrasive cleansers, strong liquid
cleansers, plastic scouring pads or oven
damage the finish. A 50/50 solution of vinegar
and hot water works well.
The knobs can be cleaned in a dishwasher or
they may also be washed with soap and water.
Make sure the inside of the knobs are dry
before replacing.
Replace the knobs in the OFF position to ensure
proper placement.
Do not use commercial oven cleaners,
cleansing powders, steel wool or harsh
abrasives on any painted surface.
Do not allow the water or cleaner to run down
inside the oven door while cleaning.
To inquire about purchasing stainless steel
appliance cleaner or polish, or to find the
location of a dealer nearest you, please call our
toll-free number:
National Parts Center
GEAppliances.com
1.800.626.2002

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jrp28Jrp20

Table of Contents