Advertisement
STEP #7
FULL SIZE BED INSTRUCTIONS
Full size bed rails (x 1 pair) (Sold separately)
From the crib, detach all bolts from the footboard. Then detach all bolts from the headboard. Insert (2) (EE) filler bolts in
top holes of headboard & footboard & tighten to snug fit. To attach bed rail, insert (2) machine bolts with lock washer &
flat washer through holes in side rails into bushings in headboard and tighten with allen wrench. Repeat this procedure
on all four areas for proper full-size bed hook-up.
(EE)
IMPORTANT: Store away all extra parts to this "crib", "toddler bed", that you are
not using for possible future use, as you may wish to convert again. Always store
the assembly directions in the pouch attached to the mattress support.
Side rail
Slat
Hardware needed for Step #7:
(AA) Allen wrench (1 piece)
(EE) Filler bolts (x 4 pieces)
Note: (EE) Filler bolts & Hardware
included with bed rails
(EE)
A
Slat
Slat
(EE)
Side rail
Allen wrench
(EE)
Bushings in
headboard
Detail A
Flat washer
Lock washer
Machine bolt
Page 16 of 16
Advertisement
