Advertisement
STEP #2
STRETCHER BAR ASSEMBLY
Stretcher Bar (x 1)
Insert barrel nuts into holes in stretcher bar
Align threaded hole in barrel nut with bolt (CC)
NOTE: Slot on barrel nut (DD) faces outward
NOTE: Do not fully tighten at this time.
(CC)
(AA)
(CC)
(AA)
Detail A
(DD)
Stretcher Bar
(DD)
Hardware needed for Step #2:
(AA) Allen Wrench (1 piece)
(CC) 2−1/2 in. Bolts (x 2 pieces)
(DD) K.D. Barrel Nuts (x 2 pieces)
(CC)
(DD)
Page 11 of 16
Advertisement
