Hitachi ED-A110A1DN Service Manual page 39

6-17 Reset of the Network Web password / User ID, Network Control password
ATTENTION : Performing this operation initializes the network settings. If the projector has
the customized settings in the network, make a note of the network settings to restore
them before this operation.
1. Display the NETWORK menu.
2. Select "OFF" in the item of DHCP.
3. Enter "255.255.255.255" in the item of IP ADDRESS.
4. Enter "255.255.255.255" in the item of SUBNET MASK.
5. Enter "255.255.255.255" in the item of DEFAULT
GATEWAY.
6. While NETWORK menu is displayed, press the RESET button of the remote control.
MENU [COMPUTER1]
PICTURE
IMAGE
INPUT
SETUP
SCREEN
OPTION
NETWORK
C.C.
EASY MENU
7. Press ▲ button to execute reset.
The operation described above resets not only Web password but also NETWORK settings.
NOTE:
When you execute this reset operation with any other settings than above (described in the
step 2 to 5), the WEB password, SNTP server address, DATE AND TIME and other sched-
ule settings are not initialized, but the network settings (DHCP, IP ADDRESS, SUBNET
MASK and DEFAULT GATEWAY) are initialized.
8. If the network settings had been customized, restore them by manual operation.
CP-A100 / ED-A100 / ED-A110 (A1DN)
:SELECT
SETUP
PROJECTOR NAME
Press RESET button
e-SHOT
INFORMATION
SERVICE
MENU [COMPUTER1]
PICTURE
IMAGE
INPUT
SETUP
SCREEN
OPTION
NETWORK
C.C.
EASY MENU
39
:SELECT
SETUP
PROJECTOR NAME
e-SHOT
INFORMATION
SERVICE