Mistral MM-6 Instruction Manual page 5

Safety Instructions
5. Ensure that the unit is placed on a clean, dry and flat surface before
operation.
6. Do not drop the unit, apply excessive force to the controls or place
heavy objects on top of the unit.
7. Do not allow excessive levels of dust to gather on the amplifier. To
clean, unplug the cooled unit and use a soft dry cloth. If necessary,
use a damp cloth without any solvents.
8. Ensure that the area in which the unit is situated has adequate
ventilation. Do not place the amplifier in a position where its
ventilation may become obstructed.
9. Avoid placement on beds, sofas, rugs, enclosed bookcases /
cabinets and any other area which may cause interference to the
ventilation of the product thus causing it to overheat.
10. Ensure that the unit is connected to the correct power supply as
indicated on the unit. Unplug the amplifier when not in use for a
long period.
11. Always make sure power cables are placed safely and are not
obstructing a walkway.
12. This product can get hot. Do not touch the tubes and keep away
from babies, children and pets.
13. To avoid risk of electric shock, do not attempt to remove the cover
or the back of unit. There are no user serviceable parts inside.
Refer servicing of internal parts to qualified service personnel. Any
unauthorised changes or modifications to this equipment would
render the manufacturer's warranty null and void.
14. WARNING: Tube electronics use high voltages that can cause
injury or death. Dangerous voltages may be stored in capacitors
many hours after the unit has been tuned "OFF".
15. Check that your local mains supply voltage agrees with the setting
indicated on the back panel of the amplifier. Always use a quality
power surge protector.
16. Always turn OFF the power switches when connecting or
disconnecting from mains power.
17. It is recommended that you disconnect the power supply from the
5