Subscribe to Our Youtube Channel
Related Manuals for Convision CC-8 Series
Summary of Contents for Convision CC-8 Series
- Page 1 Benutzerhandbuch CONVISION CC-81xx Serie Stand: April 2012 Convision Systems GmbH www.convision.com Installationshandbuch...
- Page 2 Im Installationshandbuch-Teil finden Sie die elektrische und mechanische Installation von der Kamera 2. Konfigurationshandbuch Im Konfigurations-Handbuchteil finden Sie die Beschreibung der Benutzerschnittstelle über den Internet-Browser und die Einstellungen der Parameter der Kamera, wie z.B. Videoeigenschaften, Ereignisse, usw. Benutzerhandbuch Convision Systems GmbH...
- Page 3 Teil 1 Installationshandbuch Megapixel-Netzwerkkamera CONVISION CC-81xx Serie Vers. 1.3 Stand: März 2012 Convision Systems GmbH...
- Page 4 Warnung vor gefährlicher elektrischer Spannung. Zur Wartung befolgen Sie bitte die Anweisungen des Handbuches. INFORMATION - Dieses Gerät entspricht den Richtlinien der Kategorie A für digitale Geräte, gemäß § Teil 15 der FCC- Richtlinien und der CE-Richtlinien. Diese Richtlinien dienen dem angemessenen Schutz gegen schädliche Störung wenn das Gerät in einer kommerziellen Umgebung genutzt wird.
- Page 5 Warnung Die Kamera muss regelmäßig gewartet werden. Kontaktieren Sie bitte einen Spezialisten für die Inspektion. Benutzen Sie bitte Ihre Kamera bei einem Defekt nicht weiter Falls Sie Ihre Kamera bei Rauchentwicklung oder Überhitzung weiterbenutzen, kann ein Brand verursacht werden. Installieren Sie die Kamera nur auf einem tragfähigen Untergrund Bei nicht passendem Untergrund kann es zu Verletzungen oder Beschädigungen kommen.
-
Page 6: Table Of Contents
Inhaltsverzeichnis 1. Installation von IP-Scan auf einem Windows PC 2. Die CC-81xx Serie 3. Basis-Installation der Kamera 4. Video Ausgang 5. Konfiguration der Netzwerk Einstellungen 6. Zugriff auf die IP-Kamera über das Web-Interface 7. Anschluss der Kamera an ein NVR System Installationshandbuch CC-81xx Serie... -
Page 7: Installation Von Ip-Scan Auf Einem Windows Pc
Das IP-Scan Programm dient zur Konfiguration von Netzwerkeinstellungen der Kamera. Das IP-Scan Programm steht Ihnen auf CD-ROM zur Verfügung oder Sie können es von unserer Website downloaden unter www.convision.de Die CC-81xx Serie Nachstehend wird die Rückseite der Kamera-Serie mit den zugehörigen IO Kabeln (oben rechts) und dem Netzanschlusskabel (unten rechts) abgebildet. - Page 8 1. Schrauben Sie das Objektiv auf den Objektivaufnehmer der Kamera und verbinden Sie das Kabel des Objektives mit dem AUTO IRIS Eingang auf der Rückseite der Kamera. ACHTUNG: Schrauben Sie das Objektiv nicht zu fest auf, da ansonsten das Objektiv in Kontakt mit der Sensor Platte der Kamera kommen könnte.
-
Page 9: Video Ausgang
Stromzufuhr startet die Kamera automatisch. Die Kamera kann ebenso auch über PoE versorgt werden. Video Ausgang Das Videosignal kann durch die 3 Videoanschlüsse des I/O-Kabels sowohl im “component” als auch im “composite” Format ausgegeben werden. HINWEIS: Die CC-81xx Serie unterstützt nur das „composite“ Videosignal, nicht das “component“. Ein für das „composite“... -
Page 10: Zugriff Auf Die Ip-Kamera Über Das Web-Interface
Zugriff auf die IP-Kamera über das Web-Interface Wenn Sie die IP-Kamera das erste Mal über die Brwoser-Oberfläche ansprechen möchten oder wenn Sie die IP- Adresse geändert haben, werden einige Einstellungen zum ActiveX Control benötigt. 1. Öffnen Sie den Browser des Internet Explorers 2. -
Page 11: Anschluss Der Kamera An Ein Nvr System
Anschluss der Kamera an ein NVR System Wir verweisen hierzu auf die Bedienungsanleitung des NVRs und auf das Firmware User’s Manual. Um die Kamera mit dem RTSP Protokoll mit einem NVR zu verbinden, müssen Sie die RTSP URL der Kamera spezifieren, welche im defaultmäßig in folgendem Format ist: rtsp://[IP ADDRESS]/rtpvideo1.sdp Wiederherstellung der Werkseinstellungen Für die Wiederherstellung der Werkseinstellungen stehen zwei Möglichkeiten zur Verfügung:... -
Page 12: Firmware Version
Teil 2 CONVISION CC-8xxx Cameras Users Manual Firmware Version 1.0.8 Stand: December 2011 Convision Systems GmbH... -
Page 13: About This Guide
About This Guide The User’s Manual provides functionality and instructions for the 1080p/5M series. Before Using the IP Camera/Video Server Check the PC requirements Review the OS platform requirements Read an special and import precautionary information Having basic knowledge of network setup and configuration will be helpful... - Page 14 Contents INTRODUCTION 0 The live view Setup..............................2 Set the Snapshot/Recording Path ......................3 Controls and Status..........................3 Digital Zoom............................3 Information ............................4 Streaming............................4 Audio..............................4 Control (PTZ Control).......................... 5 setup System – Information .......................... 7 System – Generic Setting ........................7 Camera Name ............................
- Page 15 RTSP URL ............................27 Administrator User & Password ......................28 Firefox...
-
Page 16: Introduction
1 INTRODUCTION This guide is for the use with the 1080p/5MP series using firmware version 1.0.8. -
Page 17: The Live View
After logging into the IP camera via the browser, the user is first presented with the Live View interface. Below is an example of the Live View page. Following the screenshot is a discussion of the different areas within the Live View page. CONVISION CC-8*** Cameras User Manual... -
Page 18: Setup
The right hand panel (Information, Streaming, Audio, Control) can be hidden by clicking the small arrow bordering the video and Streaming pane. Click the arrow (highlighted in green) to hide/display the right side panel. 1.1 Setup In the top right corner of the screen are three links. CONVISION CC-8*** Cameras User Manual... -
Page 19: Set The Snapshot/Recording Path
Motion Detection Alert will display when motion detection has been triggered. 1.3 Digital Zoom The Digital Zoom feature allows zooming in on a specific area. When using the View Size controls, a magnifying glass icon will replace the mouse pointer icon. CONVISION CC-8*** Cameras User Manual... -
Page 20: Information
The number of ROI which are enabled in the Video Setting – Profile Setting will determine the number of streams available for viewing. See the “Video Control – Video Setting” section for more information. 1.6 Audio Audio volume controls for speaker and microphone. Clicking on the icon will mute or enable. CONVISION CC-8*** Cameras User Manual... -
Page 21: Control (Ptz Control)
1.7 Control (PTZ Control) The PTZ control panel will not be present in those models where PTZ will not be used . Use the Set button to mark a preset, and the Go button to use a preset. CONVISION CC-8*** Cameras User Manual... -
Page 22: Setup
The left hand panel lists the configuration nodes which can be viewed and modified. Clicking on an item will reveal sub menus which are available. To return to the Live View page, click the Live View link in the right hand corner. CONVISION CC-8*** Cameras User Manual... -
Page 23: System - Information
The Information page is always the initial page displayed when switching to the Setup view. Basic information related to the IP camera is displayed here. The page only displays information; no changes can be made here. 2.2 System – Generic Setting Camera Name CONVISION CC-8*** Cameras User Manual... -
Page 24: System Time
This defines the method by which the digital in sensor operates. If the normal condition is open (N.O.), then the alarm will be triggered when the circuit is closed. The opposite applies for N.C. The camera LED lights can be enabled or disabled. CONVISION CC-8*** Cameras User Manual... -
Page 25: Http Port
Currently English, Simplified Chinese and Czech are available. 2.3 System – User Account Management User accounts can be added, edited or deleted via the controls in the left corner. Users are assigned to a group (admin, operator or viewer). CONVISION CC-8*** Cameras User Manual... -
Page 26: System - Maintenance
IP and User Account settings can be preserved by checking the appropriate boxes. After selecting the new firmware file, click Update to proceed. Messages that the camera is upgrading and rebooting will follow during the upgrade. CONVISION CC-8*** Cameras User Manual... -
Page 27: Upgrade Using Sd Card
After upgrading, the ActiveX controls and IE cache & history should be cleared to prevent old pages and controls from being used. Close all instances of IE and open 1 IE window. In the right corner, select Tools->Manage Add- In the Manage Add-ons window, select “All add-ons” CONVISION CC-8*** Cameras User Manual... - Page 28 Scroll down and find one of the ActiveX controls, and click the More Information link. In the More Information window, click Remove to clear the ActiveX control from IE. Repeat this for the remaining ActiveX components. CONVISION CC-8*** Cameras User Manual...
-
Page 29: Export/Import Camera Configuration
Restore Factory Default Replaces factory default settings via the web UI. Network and/or user account settings can be saved if the corresponding check boxes are selected. Reboot Device CONVISION CC-8*** Cameras User Manual... -
Page 30: System - Local Storage
Double click on folders to go up/down a directory level. 2.6 System – Record Setting When recording is done via event triggers, Record Setting will define how the recording is performed. Record Stream Profile will only display currently enabled streams. CONVISION CC-8*** Cameras User Manual... -
Page 31: Network - Ip Setting
Select DHCP or Static IP for the camera. If using static, then enter the appropriate settings for your environment. Please confirm all network related settings with the network administrator prior to making any changes. 2.8 Network – Streaming CONVISION CC-8*** Cameras User Manual... -
Page 32: Network - Ddns
If the IP camera uses DHCP, a DDNS service can provide a hostname for use with the IP camera. Registration with one of the DDNS service providers (ddns.nu, dyndns.org) is required for use of this feature. CONVISION CC-8*** Cameras User Manual... -
Page 33: Video/Audio - Video Setting
When TV Out Mode has been enabled, 2 video profiles will be enabled. Profile 2 will change to settings which will be used for the video out display (e.g. D1 resolution). Profile 1 settings will not be modified. CONVISION CC-8*** Cameras User Manual... -
Page 34: Resolution Mode (Ev8X80F Models Only)
Setting for specific ROI profiles can be found in the Video Quality Setting section. ROI profile 1 & 2 are preconfigured profiles which have some settings that are configurable (e.g. FPS). All profiles offer Constant Bit Rate (CBR) or Variable Bit Rate (VBR) mode. CONVISION CC-8*** Cameras User Manual... -
Page 35: Video/Audio - Audio Setting
In the Region Size settings, the image has a mask covering area that will not be displayed; the lighter shaded area will be what is displayed for the ROI. To adjust the ROI, click & drag the window or click within the masked area to reposition. 2.11 Video/Audio – Audio Setting CONVISION CC-8*** Cameras User Manual... -
Page 36: Video/Audio - Color Setting
While noise reduction will smooth pixilation (usually in dark areas), too much may result in blurring. IR-Cut Filter: controls IR filter operation B/Win night mode: deselect if black & white not desired in night mode CONVISION CC-8*** Cameras User Manual... -
Page 37: Event Handle - Event Rule
This applies only to a user-defined event. If 2 motion detection events have been configured (e.g. MD1 and MD2), then if MD1 is triggered, MD2 can still be triggered regardless of MD1’s Period Time setting. Be sure to click SAVE in the main Event Rule screen to save any changes. CONVISION CC-8*** Cameras User Manual... -
Page 38: Event Handle - Event Server
NFS and Samba are supported; if enabled then input relevant details. 2.15 Event Handle – Motion Detection To use motion detection, motion detection should be enabled and at least one motion detection area enabled. Checking the box for an Area (e.g. Area 1) enables it. CONVISION CC-8*** Cameras User Manual... -
Page 39: Ptz Control - Serial Setting
Pelco P and D are supported as well as RS-485 and RS-422 communication modes. Please refer to the PTZ device’s required settings to configure the web UI PTZ settings. 2.17 System Log – View Log The System Log displays system and event details. CONVISION CC-8*** Cameras User Manual... -
Page 40: System Log - Remote Log Setting
Event Log contains information related to events triggered. 2.18 System Log – Remote Log Setting The System and/or Event log data can also be remotely logged. Check the box to enable and provide the corresponding log server address. CONVISION CC-8*** Cameras User Manual... -
Page 41: Streaming Video
Using VLC for example, select Media from the menu bar and Open Network Stream. Next specify IP address of the camera and stream profile. Click Play and video will begin streaming in the video player. WARNING: firewalls and other network security may prevent video streaming. CONVISION CC-8*** Cameras User Manual... -
Page 42: Authentication
Then a username/password must be supplied with the RTSP URL rtsp://USERNAME:PASSWORD@[IP ADDRESS]/rtpvideo[1-4].sdp 3.2 Image Snapshot in a Browser To view an image snapshot in a browser, the jpeg.cgi call will provide a VGA snapshot. http://<IP ADDRESS>/config/jpeg.cgi CONVISION CC-8*** Cameras User Manual... -
Page 43: Adding A Camera To An Nvr
4 ADDING A CAMERA TO AN NVR The following gives some basic guidance for adding CONVISION MP cameras to an NVR system that supports RTSP streaming. Please refer to the NVR instructions for specific details on how to add and administer cameras for the NVR system. - Page 44 To assign a specific profile stream to the NVR, then append the appropriate profile number to the access name: rtsp://[IP ADDRESS]/[ACCESSNAME][PROFILE#].sdp example: rtsp://10.1.21.38/rtpvideo3.sdp 4.2 Administrator User & Password The administrator username is “root” and the default password is “pass”. CONVISION CC-8*** Cameras User Manual...
- Page 45 5 FIREFOX While there is support for Firefox, the Live View interface will not have many of the controls available in IE. These controls are implemented using ActiveX which is only supported by IE. CONVISION CC-8*** Cameras User Manual...
Need help?
Do you have a question about the CC-8 Series and is the answer not in the manual?
Questions and answers