■
Installing a LATCH-Compatible Child Seat
A LATCH-compatible child seat can be installed in either of the two outer rear seats.
A child seat is attached to the lower anchors with either the flexible or rigid type of
connectors.
Marks
Covers
Lower Anchors
Rigid Type
1. Locate the anchor marks affixed to the base
of the seat cushion.
2. Pull out the anchor covers under the marks
to expose the lower anchors.
3. Place the child seat on the vehicle seat, then
attach the child seat to the lower anchors
according to the instructions that came
with the child seat.
u
When installing the child seat, make sure
that the lower anchors are not
obstructed by the seat belt or any other
object.
uuChild SafetyuSafety of Infants and Small Children
Continued
65