uuIndicatorsuDriver Information Interface Warning and Information Messages
Message
●
Continuously
variable transmission
models
●
●
●
●
104
Condition
Appears if you push the ENGINE START/STOP
button to turn the engine off without the shift lever
in
(
P .
Appears when the power mode is in ACCESSORY.
Appears after the driver's door is opened when the
power mode is in ACCESSORY.
Appears when you close the door with the power
mode in ON without the smart entry remote inside
the vehicle.
Appears when the smart entry remote battery
becomes weak.
*
Explanation
U.S. models
Move the shift lever to
P . The power mode changes to
(
●
VEHICLE OFF.
Canadian models
Move the shift lever to
●
START/STOP button twice.
Press the ENGINE START/STOP button twice with your
●
foot off the brake pedal (automatic transmission) or the
clutch pedal (manual transmission) to change the power
mode to VEHICLE OFF (LOCK).
Disappears when you bring the smart entry remote back
●
inside the vehicle and close the door.
2 Smart Entry Remote Reminder P. 168
Replace the battery as soon as possible.
●
2 Replacing the Button Battery P. 575
(
P , then press the ENGINE
—