Drive Extenders - HP ProBook 4545s Maintenance And Service Manual

Drive extenders

Description
Optical drive extender
Hard drive extender
Before removing the drive extenders, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Bottom door (see
b. Optical drive (see
c. Hard drive (see
d. Metal heat shield (see
e. Fan (see
f. Heat sink (see
g. Keyboard (see
h. Top cover (see
i. System board (see
Remove the hard drive extender:
1. Position the system board with the drive extenders to your right.
76 Chapter 4 Removal and replacement procedures
Battery on page
Bottom door on page
Optical drive on page
Hard drive on page
Metal heat shield on page
Fan on page 53).
Heat sink on page
Keyboard on page
Top cover on page
System board on page
37).
38).
41).
45).
51).
54).
47).
58).
70).
Spare part number
683498-001
683487-001