Advertisement
Using the Flex
•
Open the "Water Tank Cap" (6).
(Fig. 1)
•
Hold the base of the "Water Tank"
(5) and slide up the main unit until it
locks into place at the "Usage Line"
(4). Make sure the "Control Switch"
is in the Off position. (Fig. 2)
•
Remove the "Nozzel Cover" (11)
and snap the "Nozzle" (1) into the
"Nozzle Storage" (3) as indicated.
(Fig. 3 & Fig. 4)
•
Flip the nozzle up vertically and
press down gently until it snaps into
place. (Fig. 5 & Fig. 6)
•
Ensure that the "Nozzel Lock &
Release" (2) is pressed firmly against
the nozzle in the locked position
before operating. (Fig. 7)
•
Fill the water tank with water. Do not
use water warmer than 40 ºC/104 ºF
and do not add salt, toothpaste, or
chemicals of any kind. (Fig. 8)
•
Close the "Water Tank Cap". (Fig. 9)
•
Place the nozzle in your mouth and
slide the "Control Switch" to the
desired mode.
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5
Fig.6
Fig.7
Fig.8
Fig.9
Press down
N
N
G
G
Advertisement
