Download Print this page

Connecting And Charging - Flex GS28150-1000 Instruction Manual

Advertisement

Connecting and Charging

It is recommended to fully charge the unit for 8
hours prior to first use. A full charge will last for
approximately one month of regular use.
Slide the "Control Switch" to the "Off" position.
Make certain that the "Charging Port "(9) is completely
dry.
Insert the adapter firmly into the "Charging Port."
Plug the other end of the adapter into an electrical
outlet.
The "Charging Indicator" light will glow to indicate
that the unit is charging.
Tips for Proper Use
Hold the device vertically with the nozzle upward.
Place the nozzle in your mouth prior to turning it on in
the desired mode.
Lean over a sink and keep your mouth slightly closed
while operating so the water will not splatter.
Position the water jet flow at a 90° angle to the teeth
and gums for optimum cleaning.
Slowly move the water jet along your upper and lower
teeth and gum line to thoroughly irrigate the area.
Take extra care between teeth

Advertisement

loading