VTech Go! Go! Smart Wheels User Manual page 12

7. Insert the SUPPORT into the slot on the 90-DEGREE SNAP
TRACK. Then, attach the 90-DEGREE SNAP TRACK to the L
SNAP TRACK as shown below. You will hear a "click" sound to
indicate that they are attached securely.
8. Attach the other RAMP SNAP TRACK to the 90-DEGREE SNAP
TRACK. You will hear a "click" sound to indicate that they are
attached securely.
9. Insert the MINE SHAFT BASE into the bottom of the MINE SHAFT
as shown below. You will hear a "click" sound to indicate the pieces
are securely attached.
11