Toyota 2011 Camry Hybrid Owner's Manual page 360

4-3. Do-it-yourself maintenance
Engine oil consumption
n
The amount of engine oil consumed depends on the oil viscosity, the
l
quality of the oil and the way the vehicle is driven.
More oil is consumed under driving conditions such as high speeds and
l
frequent acceleration and deceleration.
l A new engine consumes more oil.
When judging the amount of oil consumption, keep in mind that the oil
l
may have become diluted, making it difficult to judge the true level accu-
rately.
Oil consumption: Max. 1.1 qt./600 miles, 0.9 Imp. qt./600 miles (1.0 L per
l
1000 km)
If you consume more than 1.1 qt. (1.0 L, 0.9 Imp. qt.) every 600 miles
l
(1000 km), contact your Toyota dealer.
After changing the engine oil (U.S.A. only)
n
To reset the oil change system, follow the procedure below:
STEP 1
Turn off the hybrid system with the trip meter A reading shown.
(→P. 150)
STEP 2
The "POWER" switch must be set in ON mode while holding down
the trip meter reset knob. A message "OIL MILEAGE RESET
MODE" will appear on the display.
STEP 3
Hold down the knob for at least 5 seconds. A message "COM-
PLETE" will appear and the message "OIL MILEAGE RESET
MODE" goes off.
344