Toyota 2011 Camry Hybrid Owner's Manual page 331

Hide thumbs Also See for 2011 Camry Hybrid:

Table of Contents

3-7. Other interior features

Programming HomeLink

Point the remote control for the

device 1 to 3 in. (25 to 75 mm)

from the HomeLink

Press and hold down one of the

buttons on HomeLink

button on the transmitter. When

the indicator light on HomeLink

changes from a slow to a rapid

flash after 20 seconds, you can

release both buttons.

Test the operation of HomeLink

by pressing the newly pro-

grammed button.

If programming a garage door

opener, check to see if the garage

door opens and closes. If the

garage door does not operate,

see if your garage transmitter is

of the Rolling Code type. Press

door has the rolling code feature

seconds and then remains lit. If

your transmitter is of the Rolling

Code type, proceed to the head-

ing "Programming a rolling code

control but-

in view while pro-

button. The garage

) flashes rapidly for 2