Honda 1994 Accord Sedan Owner's Manual page 78

Use the TUNE bar to change the
frequency in small increments. Press
the top to go up, and the bottom
to go down. Press and release to
change the frequency to the next
number.
Press the TUNE bar and hold it to go
to a frequency that is far away. The
frequency display will begin to count
rapidly. It will stop counting when
you release the bar.
The SEEK function searches for
radio stations with strong signals.
Every time you press the ON/VOL
button, it advances to the next
station.
Presetting
The preset buttons allow you to store
radio frequencies for later selection.
Each button will store one frequency
on the AM band, and one on the FM
band.
To store a frequency:
1. Select the desired band, AM or
FM.
2. Use the TUNE or SEEK function
to tune the radio to a desired
station.
3. Pick the Preset button you want
for that station. Press the button
and hold it until you hear a beep.
Repeat steps 1 to 3 to store a total
of six stations each on AM and
FM.
Audio System
Once that station's frequency is
stored, simply press and release the
proper preset button to tune to it. If
you want to change any preset
button's selection, store another fre-
quency as described. The frequen-
cies you preset will be lost if your
car's battery goes dead or is discon-
nected.
Adjusting the Sound
Use the Balance and Fader controls
to adjust the sound "direction". The
Balance control moves it left-to-right.
The Fader control moves it front-to-
back.
Use the Tone control to adjust the
bass and treble to your liking.
Comfort and Convenience Features