Honda 1994 Accord Sedan Owner's Manual page 73

Heating and Cooling
To Cool with A/C
To operate the air conditioning
system, press the air conditioning
switch. Set the fan to the desired
speed. You can also use the
mode button to direct air out
of the dash and heater vents.
To cool the interior down rapidly
after the car has been sitting in the
sun:
1. Start the engine.
2. Turn on the A/C by pressing the
switch.
3. Set the fan to maximum speed.
4. Open the windows partially. Select
and
When the interior reaches a com-
fortable temperature, close the
windows and set the system for
cooling as described above.
Comfort and Convenience Features
FAN CONTROL TEMPERATURE
DIAL CONTROL DIAL
Air conditioning places an extra load
on the engine. Watch the engine
coolant temperature gauge (see page
38) when using the A/C in heavy
traffic or driving up long hills. If it
moves near the red zone, turn off the
air conditioning until the gauge
reads normally.
AIR CONDITIONING
SWITCH
MODE BUTTONS
To Heat
To warm the interior:
1. Start the engine.
2. Select and
3. Switch the fan to the desired
speed.
4. Adjust the warmth of the air with
the temperature control dial.