Panasonic RX-ES20 Operating Instructions Manual page 15

7 7
7
4
3
7
1
TAPE CD
7
2
7
3
7
4
7
1
2
Recording CDs
ALL-REC
Records the whole CD or selected tracks. When the tape finishes
before CD, recording and CD pauses for you to resume recording on
the opposite side.
\
Preparation: Insert a CD ( page 10).
Press [ n TAPE/CD] to switch to CD mode.
1
Press [ CD REC MODE ] to display "ALL-REC".
2
Each time you press the button:
ALL-REC 1-REC OFF
The display shows the tape length needed.
"C – – – –" indicates the tape needed exceeds 100 minutes.
You can still record, but some tracks may not be recorded if the
tape isn't long enough.
Load a cassette with the side for recording facing
3
up.
[
Press [ ] to start recording.
/ K
4
The unit rewinds the tape, records 10 seconds of silence, and
then starts recording.
To stop recording
Press [n TAPE/CD]. The CD also stops.
If a track is interrupted at the end of the side facing up
Recording and CD pauses.
To record the track again on the opposite side
1. Press [0 DECK], flip the cassette, and insert it.
[
2. Press [ / K].
The unit records 10-second of silence, and resumes recording
from the beginning of the cut-off track.
To record selected tracks
1
\
Program tracks ( page 12).
2
Do steps 2. to 4..
Note
You cannot use ALL-REC with random play and repeat play (
11).
\
page
15
RQT5189