Replacing The Headlight Bulb - Yamaha 2009 XVS1100AY Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
8. Place the ignitor unit panel in the
original position and install the
quick fasteners.
TIP
To install a quick fastener, push its pin
back so that it will protrude from the fas-
tener head, then insert the fastener and
push the protruding pin in until it is flush
with the fastener head.
7
1. Quick fastener (after removal)
2. Quick fastener (before installation)
9. Install the rider seat.

Replacing the headlight bulb

This model is equipped with a quartz
bulb headlight. If the headlight bulb
burns out, replace it as follows.
NOTICE
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the bulb,
and the bulb life will be adversely af-
fected. Thoroughly clean off any dirt
and fingerprints on the headlight
bulb using a cloth moistened with al-
cohol or thinner.
1. Do not touch the glass part of the bulb.
1. Remove the headlight unit by re-
moving the screws.
7-29
EAU23794
ECA10660
1. Screw
2. Disconnect the headlight coupler,
and then remove the bulb cover.
3. Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
1. Headlight bulb holder