Toyota 2007 Prius Owner's Manual page 310

28p130a
25 to 75 mm
R
HomeLink
(1 to 3 in.)
Hand−held
garage transmitter
2. Place your hand−held garage transmit-
ter 25 to 75 mm (1 to 3 in.) away from
R
the surface of the HomeLink
Keep the red indicator light
R
HomeLink in view while programming.
310
28p131
3. Simultaneously
hand−held garage
. along with the selected HomeLink
ton.
on the
Do not release the buttons until step 4
has been completed.
4. When the indicator
R
HomeLink changes from a slow to a
rapid flash, you can release both but-
tons.
press and hold the 5. Test the operation of the HomeLink
transmitter button pressing the newly programmed button.
R
but- If programming a garage door opener,
check to see if the garage door opens
and closes.
If the garage door does not operate, iden-
tify if your garage transmitter is of the
light on the
"Rolling Code" type. Press and hold the
programmed HomeLink
rage door has the rolling code feature if
the indicator light (on the HomeLink
flashes rapidly and then remains lit after
2 seconds. If your garage transmitter is
the "Rolling Code" type, proceed to the
heading "Programming a rolling code sys-
tem".
28p132
R
by
R
button. The ga-
R
)