Table of Contents
Advertisement
Cooling System
FILLER NECK
Fill up to here
7. Pour coolant into the radiator up
to the base of the filler neck.
Maintenance
BLEEDER BOLT
8. Loosen the bleeder bolt on top of
the engine. Tighten it again when
coolant comes out in a steady
stream with no bubbles.
9. Refill the radiator to the base of
the filler neck. Put the cap on the
radiator, and tighten it only to the
first stop. Start the engine and let
it run until it warms up (the
radiator cooling fan comes on at
least twice).
RESERVE TANK
10. Turn off the engine. Check the
level in the radiator, add coolant if
needed. Install the radiator cap,
and tighten it fully.
11. Fill the reserve tank to the MAX
mark. Install the reserve tank cap.
Hide quick links:
Advertisement
Table of Contents
