Honda 2003 CR-V Owner's Manual page 268

Spark Plugs
8. Torque the spark plug. (If you do
not have a torque wrench, tighten
the spark plug two-thirds of a turn
after it contacts the cylinder head.)
Tightening torque:
13 lbf·ft (18 N·m , 1.8 kgf·m)
268
Maintenance
Tighten the spark plugs caref ully. A
spark plug that is too loose can
overheat and damage the engine.
Overtightening can cause damage to
the threads in the cylinder head.
9. Install the ignition coil into the
hole.
10. Connect the wire connector to the
ignition coil. Make sure it locks in
place.
11. Push the ignition coil down all the
way. Install the bolt.
12. Repeat this procedure for the
other three spark plugs.
13. Reinstall the coil cover, and
tighten the four nuts.
Specifications:
NGK:
IZFR6K-11
DENSO:
SKJ20DR-M11