Honda 1996 Civic Del Sol Owner's Manual page 133

Main Menu
Cooling System
DRAIN BOLT
4. DOHC VTEC model only
Remove the drain bolt from the
engine block.
Maintenance
Table of Contents
RESERVE TANK
HOLDER
5. Remove the reserve tank from its
holder by pulling it straight up.
Drain the coolant, then put the
tank back in its holder.
6. When the coolant stops draining,
tighten the drain plug in the
bottom of the radiator.
7. DOHC VTEC model only
RESERVE
Apply non-hardening sealant to the
TANK CAP
drain bolt threads and reinstall the
bolt in the engine block. Tighten it
securely.
8. Mix the recommended antifreeze
with an equal amount of purified
or distilled water in a clean
container. The cooling system
capacity is:
With manual transmission:
(S, Si)
3.1 (0.82 US gal, 0.68 Imp gal)
(VTEC)
4.5 (1.19 US gal, 0.99 Imp gal)
With automatic transmission:
(S)
3.0 (0.79 US gal, 0.66 Imp gal)
(Si)
3.2 (0.85 US gal, 0.70 Imp gal)