Honda 1995 Civic Sedan Owner's Manual page 79

The SEEK function searches the
band for stations with a strong signal.
Depending on which side you press
on the TUNE/SEEK bar, the system
searches up or down from the
current frequency. Press the bar
until you hear a beep, then release it.
The system searches until it finds a
station with a strong signal, then
stops.
Presetting
The preset buttons allow you to store
radio frequencies for later selection.
Each button will store one frequency
on the AM band, and two on the FM
band.
To store a frequency:
1. Select the desired band, AM or
FM. FM1 and FM2 let you store
two frequencies with each Preset
button.
2. Use the TUNE or SEEK function
to tune the radio to a desired
station.
3. Pick the Preset button you want
for that station. Press the button
and hold it until you hear a beep.
4. Repeat steps 1 to 3 to store a total
of six stations on AM and twelve
on FM.
Audio System
Once that station's frequency is
stored, simply press and release the
proper preset button to tune to it. If
you want to change any preset
button's selection, store another fre-
quency as described. The frequen-
cies you preset will be lost if your
car's battery goes dead or is discon-
nected.
Comfort and Convenience Features