Honda 1995 Civic Sedan Owner's Manual page 156

3. Remove the rubber weather seal
by pulling on the tab.
4. Unclip the end of the hold-down
wire from its slot. Pivot it out of
the way and remove the bulb.
5. Insert the new bulb into the hole,
making sure the tabs are in their
slots. Pivot the hold-down wire
back in place and clip the end into
the slot.
6. Push the rubber weather seal over
the bulb. Make sure the tab is on
the top.
7. Push the electrical connector onto
the tabs of the new bulb.
Turn on the headlights to test the
new bulb.
8. (Passenger's side)
Reinstall the air intake tube.
Replacing the Front Side Marker/
Turn Signal and Parking Light
Bulb
SCREW
1. Use a Phillips-head screwdriver to
remove the screw from the top of
the fender.
2. Move the side marker light
assembly forward until it slides out
of the body.
3. Turn the socket one-quarter turn
counterclockwise to remove it
from the lens.
Maintenance
Lights
CONTINUED