Helmet Holder; Adjusting The Shock Absorber; Assemblies - Yamaha 2005 Virago XV250T Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
3
1. Projection
2. Seat holder
2. Place the rider seat in the original
position, and then tighten the bolts.
NOTE:
Make sure that the rider seat is properly
secured before riding.

Helmet holder

1. Helmet holder
2. Unlock.
To open the helmet holder, insert the
key into the lock, and then turn the key
as shown.
To lock the helmet holder, place it in the
original position, and then remove the
key.
WARNING
Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of con-
trol and possibly an accident.
3-9
EAU14281

Adjusting the shock absorber

assemblies

1. Spring preload adjusting ring
2. Position indicator
Each shock absorber assembly is
equipped with a spring preload adjust-
ing ring.
CAUTION:
EWA10160
Never attempt to turn an adjusting
mechanism beyond the maximum or
minimum settings.
EAU14880
ECA10100