Selecting A Station; Selecting A Station That Is Preset; Setting The Frequency - Subaru Navigation 2009 Forester Manual

Listening to the radio

Selecting a station

Selecting a station that is preset

Presetting a station in advance in the in-vehicle equipment allows you
to invoke that station.
1
Select the station preset on the FM radio screen or AM radio
screen, or press the or
• When the FM radio screen or AM radio screen is not displayed,
press the button.
• Each time the or
pressed, the station preset changes over. Pressing the
button changes over the station in the descending order of the
preset number, while pressing the
in ascending order of the preset number.
NOTE
For detailed method for presetting a station, refer to "Presetting a station" on
Page 119.
116 Audio and Visual
button of the steering switch.
button of the steering switch is
button changes it over

Setting the frequency

It is possible to set the frequency manually to listen to the radio.
1
Rotate the [MODE/TUNE] button in either direction.
• Turning the [MODE/TUNE] button counterclockwise lowers the
frequency and turning it clockwise heighten the frequency.
• For the FM radio, select
BAND. Each time (BAND) is selected, a changeover is
made between FM1 and FM2.
(BAND) to make selection of the