Honda 1996 Accord Wagon Owner's Manual page 72

Audio System
Operating the Cassette Player
Turn the audio system ON. Make
sure the tape opening on the
cassette is facing to the right,
then insert the cassette most of
the way into the slot. The system
will pull it in the rest of the way
and begin to play.
The tape direction indicator will
light to show you which side of
the cassette is playing. The
indicates the side you inserted
facing upward is now playing. If
you want to play the other side,
press the PROG button.
Dolby B noise reduction turns on
when you insert a cassette. If the
cassette was not recorded using
Dolby noise reduction, turn it off
by pressing the button.
Comfort and Convenience Features
When the system reaches the
end of the tape, it will
automatically reverse direction
and play the other side. If you
want to remove the cassette from
the drive, press one of the EJECT
buttons (AM/CD or FM1/FM2).
The system will automatically
eject the cassette whenever you
turn off the system or the
ignition switch.
Tape Search Functions
With a cassette playing, you can
use the FF, REW, TMS, or REPEAT
functions to find a desired
program.
FF/REW — Push down the
FF/REW/TMS switch to rewind
the tape rapidly. Push the switch
up to fast forward. Press the
PLAY button to take the system
out of rewind or fast forward. If
the system reaches the end of
the tape while in fast forward or
rewind, it automatically stops
that function, reverses direction,
and begins to play.
TMS — The Tape Music Search
function allows you to find the
beginning of a song or passage.
To activate TMS, press the TMS
button. The light in the button
will remain on as a reminder that
it is activated. Then press FF or
REW to move the tape forward or
backward. When the system
reaches the beginning of the next
song or passage (FF), or the
beginning of the current one
(REW), it goes back to PLAY
mode. Deactivate TMS by
pressing the TMS button again.