Head Restraints Adjusting - Mercedes-Benz 2013 GL X166 Operator's Manual

Seats
106
injury to the head and neck in the event of an
accident or similar situation.
Do not drive the vehicle without the seat head
restraints. Head restraints are intended to
help reduce injuries during an accident.
! To avoid damage to the seats and the seat
heating, observe the following information:
keep liquids from spilling on the seats. If
R
liquid is spilled on the seats, dry them as
soon as possible.
if the seat covers are damp or wet, do not
R
switch on the seat heating. The seat
heating should also not be used to dry
the seats.
clean the seat covers as recommended;
R
see "Interior care".
do not transport heavy loads on the
R
seats. Do not place sharp objects on the
seat cushions, e.g. knives, nails or tools.
The seats should only be occupied by
passengers, if possible.
when the seat heating is in operation, do
R
not cover the seats with insulating
materials, e.g. blankets, coats, bags,
seat covers, child seats or booster seats.
! Make sure that there are no objects in the
footwell or behind the seats when resetting
the seats. There is a risk that the seats
and/or the objects could be damaged.
i It is not possible to remove the head
restraints from the front seats. The rear-
compartment head restraints, however,
can be removed (
For more information, contact a qualified
specialist workshop.
Further related subjects:
i
Cargo compartment enlargement
R
(folding down the rear bench seat)
Y
( page 334)
Y page 108).
Adjusting the seats electrically
Head restraint height
:
Seat cushion angle
;
Seat height
=
Seat fore-and-aft adjustment
?
Backrest angle
A
i Vehicles with memory function: if PRE-
®
SAFE has been triggered, the front-
passenger seat will be moved to a better
position if it was previously in an
unfavorable position.
i You can store the seat settings using the
memory function ( Y
Adjusting the head restraints
Adjusting the head restraints manually
Adjusting the head restraint height
page 120).