Changing a Flat Tire
The jack is behind a cover in the
6.
right fender. Remove the cover by
turning the handle counterclock-
wise, then pulling on the cover.
248
JACK
Turn the jack's end bracket
7.
counterclockwise to loosen it, then
remove the jack.
8.
Loosen each wheel nut 1/2 turn
with the wheel wrench.
JACKING POINT
Place the jack under the jacking
9.
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch.