Table of Contents
Advertisement
7.
Install the new bulb in the socket.
Push the socket into the light
8.
assembly and turn it clockwise
until it locks.
9.
Test the lights to make sure the
new bulb is working.
10.
Install the trunk lining and secure
it with the fasteners. To reinstall a
fastener, reset the fastener by
pushing on the pointed end until it
pops back almost flush with the
fingers on the housing. Put the
fastener in the hole of the trunk
lining and push on the center until
it locks (the center is flush with
the head).
Lights
205
Maintenance
Advertisement
Table of Contents
