Table of Contents
Advertisement
Convertible Top
FASTENER
STRAP
PIN
4.
Pull down the strap on the
passenger's side of the cover, and
align its snap with the pin on the
trim panel behind the door. Press
on both sides of the snap to attach
it to the pin.
5.
Pull down the strap on the driver's
side of the cover, and align its
snap with the pin on the trim panel
behind the door. Press on both
sides of the snap to attach it to the
pin.
64
SNAP
6.
Fit the rear of the cover into the
space between the convertible top
and its molding.
7.
To remove the cover, pull the snap
buttons.
Raising the Convertible Top
1.
Apply the parking brake. The
convertible top will not operate
unless the parking brake is fully
engaged.
2.
Turn the ignition switch to ON (II).
3.
Push the ROOF switch forward
and hold it. The windows, if raised,
will lower automatically.
The convertible top will rise.
Release the ROOF switch when
the top reaches the windshield
header.
Advertisement
Table of Contents
