Honda 1994 Accord Coupe Owner's Manual page 46

3. Press and hold the SET/decel
button on the steering wheel until
the CRUISE CONTROL light next
to the speedometer comes on.
This shows the system is now
activated.
The set speed may vary slightly,
particularly on hills.
Changing the Set Speed
You can increase the set cruising
RESUME/
speed in either of two ways:
accel
Press and hold the RESUME/
accel button. The car will acceler-
ate slowly. When you reach the
desired cruising speed, release the
button.
Push on the accelerator pedal. Ac-
celerate to the desired cruising
speed and press the SET/decel
SET/decel
button.
Steering Wheel Controls
You can decrease the set cruising
speed in either of two ways:
Press and hold the SET/decel
button. The car will decelerate.
Release the button when you
reach the desired speed.
Tap the brake or clutch pedal
lightly with your foot. The
CRUISE CONTROL light on the
instrument panel will go out.
When the car slows to the desired
speed, press the SET/decel button.
The car will then maintain the
desired speed.
Instruments and Controls
CONTINUED