Panasonic SC-PT870 Operating Instructions Manual page 21

To rotate a picture (during pause)
[JPEG]:
0,------. 90,------.180,------.270
ROTATION
^--------------------------------------------J
Menu 2 (Video)
NORMAL
CINEMA1:
PICTURE
MODE
CINEMA2:
DYNAMIC:
ANIMATION:
To select zoom sizes
NORMAL, AUTO ([DVD-VR] [DVD-V]
[VCD]), k2, k4
ZOOM
≥[JPEG]: during pause
If you have chosen "480p"/"576p"/
"720p"/"1080p" (progressive), "1080i"
(interlaced) ["VIDEO FORMAT" in Menu
TRANSFER
4 (HDMI)] or "PROGRESSIVE" under
MODE
"VIDEO OUT (I/P)" (
menu), select the method of conversion
for progressive output to suit the type of
material.
≥The setting will return to "AUTO" or
"AUTO1" when the disc tray is opened,
the unit is turned off or another source
is selected.
When playing PAL discs
AUTO:
VIDEO:
FILM:
When playing NTSC discs
AUTO1:
AUTO2:
VIDEO:
When you select "AUTO" the
constructing method of the DivX
contents is automatically distinguished
SOURCE
and output. If the picture is distorted,
SELECT
select "INTERLACE" or
[DivX]
"PROGRESSIVE" depending on which
constructing method was used when the
contents were recorded to disc.
AUTO, INTERLACE, PROGRESSIVE
Mellows images and
enhances detail in dark
scenes.
Sharpens images and
enhances detail in dark
scenes.
Enhances the contrast for
powerful images.
Suitable for animation.
27, VIDEO
Automatically detects the
film and video content, and
appropriately converts it.
Select when using
"AUTO", and the content
is distorted.
Select this if
the edges of
the film
content
appear jagged or rough
when "AUTO" is selected.
However, if the video
content is distorted as
shown in the illustration to
the right, then select
"AUTO".
Automatically detects the
film and video content, and
appropriately converts it.
In addition to "AUTO1",
automatically detects film
contents with different
frame rates and
appropriately converts it.
Select if the video content
is distorted when using
"AUTO1" or "AUTO2".
Menu 3 (Audio)
To make the dialogue in movies
easier to hear
DIALOGUE [DVD-V] (Dolby Digital, DTS, 3-channel
or higher, with the dialogue recorded in
ENHANCER
the center channel)
[DivX] (Dolby Digital, 3-channel or
higher, with the dialogue recorded in the
center channel)
OFF, ON
Menu 4 (HDMI)
To show HDMI information.
HDMI
( below, Confirming HDMI
HDMI STATUS information)
This works when the HDMI connection
is being used with "VIDEO PRIORITY"
( 28, HDMI menu) set to "ON".
HD ENHANCER
To sharpen the "720p", "1080i" and
"1080p" picture quality
OFF, 1 (weakest) to 3 (strongest)
This works when the HDMI connection
is being used with "VIDEO PRIORITY"
( 28, HDMI menu) set to "ON".
VIDEO FORMAT
To select suitable picture quality
with your TV
(Video recordings will be converted to,
and output as, high-definition video.)
480p/576p/720p/1080p
§
(progressive)
480i/576i/1080i (interlaced)
§
≥If the picture is distorted, press and
hold [CANCEL] until the picture is
displayed correctly. (The output will
return to "480p"/"576p".)
The numbers displayed depend on
§
the disc being played. One of the
above numbers is displayed.
This works when the HDMI connection
is being used with "VIDEO PRIORITY"
( 28, HDMI menu) set to "ON".
COLOUR
SPACE
To select suitable picture colour with
your TV
YCbCr 4:2:2
YCbCr 4:4:4
RGB
≥If the setting above is not compatible
with your TV, it will not be displayed.
Confirming HDMI information
e.g.
1
CONNECTED STATE
2
AUDIO STREAM
3
MAX CHANNEL
4
VIDEO FORMAT
5
COLOUR SPACE
1 Connection status
2 Shows the output signal type.
3 Shows the number of audio channels.
4 ( above, VIDEO FORMAT)
5 ( above, COLOUR SPACE)
[Note]
When "OFF" is selected in "AUDIO OUT" (
menu), "– – –" will be displayed in "AUDIO STREAM".
HDMI --- INFORMATION
CONNECTED
PCM
2ch
720p
YCbCr 4:4:4
28, HDMI
21